Miramar Cost Guide
Garage floor coating cost in Miramar, FL — every number on one page
The garage floor coating cost Miramar homeowners budget for is really four numbers stacked: the system, the size, and — only when they truly apply — removal and moisture work. This page prices each one separately so you can rebuild any quote you receive and see exactly where it is fat, thin, or silent.
System-by-system price table
| System | Per sq ft | 1-car (~200–250 sq ft) | 2-car (~400–500 sq ft) | Return to service |
|---|---|---|---|---|
| Epoxy + flake + polyaspartic topcoat | ~$6–$12 | $1,200–$3,000 | $2,400–$6,000 | ~24 hrs to vehicles |
| Full polyaspartic system | ~$6–$12 | $1,200–$3,000 | $2,400–$6,000 | Same day walk-on; ~24 hrs vehicles |
| 100% solids epoxy (no flake) | ~$5–$7 | $1,000–$1,750 | $2,000–$3,500 | 2–4 days |
| Simpler epoxy / big-box DIY kits | ~$3–$7 pro; kits vary | — | — | Days; highest peel risk in FL heat |
| Metallic epoxy (design) | ~$8–$12+ | $1,600–$3,000+ | $3,200–$6,000+ | 2–3 days |
Ranges reflect public South Florida installer pricing. A quote below the range usually means etch-instead-of-grind prep or a thin topcoat; a quote above it should itemize what the extra money buys.
The two add-ons, priced honestly
Old-coating removal: ~$1.50–$3.00 / sq ft
Applies only if a previous coating exists and is failing or incompatible. The old material is ground off and the slab re-profiled. If your floor is bare concrete, this line should be $0 on your quote — check that it is.
Moisture mitigation: ~$1.50–$3.00 / sq ft
Applies only if the slab tests wet. Testing itself typically runs a few hundred dollars where charged separately. Florida's water table makes this the most skipped — and most regretted — step in the state.
Prefer to run your own combination? The cost calculator stacks size, system, and both add-ons into one planning range. Questions while you compare quotes? Call (786) 741-7667.
Cost questions, answered straight
What is the average garage floor coating cost in Miramar?
For the flake-and-polyaspartic system most Miramar homeowners choose, budget $6–$12 per sq ft installed: roughly $2,400–$6,000 for a 2-car garage and $1,200–$3,000 for a 1-car. Townhome garages price higher per foot because setup, grinding, and cleanup are fixed costs spread over fewer square feet.
What does epoxy floor cost in Miramar compared with polyaspartic?
The epoxy garage floor cost Miramar installers quote for a 100% solids system without flake runs about $5–$7 per sq ft. A full polyaspartic system runs $6–$12 per sq ft. The gap buys faster cure (cars back in about a day), better UV stability at the door line, and stronger hot-tire resistance — not a different look.
How much more is a 1-day install?
The 1 day garage floor cost Miramar homeowners see is usually the polyaspartic end of the range, not a separate surcharge — speed is a property of the system, not an add-on. Be wary of any quote that charges a rush fee on top of a polyaspartic price: the fast cure is already in that number.
Does removing my old coating double the price?
No. Removal typically adds about $1.50–$3.00 per sq ft — the old material has to be ground off and the slab re-profiled. It is real work, and it is also the line most often hidden inside a vague 'prep' charge. Ask for it as its own line.
Why won't anyone give me an exact price online?
Because three things set the final number and none are visible in a photo: slab moisture, crack and joint condition, and what is already on the floor. Any exact online price is a guess that becomes a change order later. Ranges like ours are the honest version; your installer's on-site measurement makes it exact.