Miramar Cost Calculator
Run your Miramar garage numbers before anyone quotes you
Pick a size, choose a system, and tick the boxes that honestly apply — an old coating to remove, a slab that might need moisture work. Figures come from our Miramar cost guide. Arithmetic, not a quote.
Planning range
$2,700 – $5,400
Epoxy + decorative flake + polyaspartic topcoat on 450 sq ft. This is arithmetic from published per-square-foot ranges — not a quote. Your real price is confirmed on site after prep and moisture are checked.
How to read your range
The low end
Sound bare concrete, minimal crack work, a dry moisture reading. Plenty of Miramar garages land here — including many in the newer west Miramar communities.
The middle
Where most Miramar family garages actually land: full prep, a few cracks filled, a flake system with a polyaspartic topcoat.
The high end
Old coating removal, real crack repair, or moisture mitigation in the number. The on-site visit — not this page — tells you which end is yours.
Calculator questions
What does a 2-car garage floor coating cost in Miramar with these numbers?
Run it yourself above: a typical Miramar 2-car garage (about 400–500 sq ft) in the flake-and-polyaspartic system at $6–$12 per sq ft lands around $2,400–$6,000 — the 2 car garage coating cost Miramar shoppers compare every quote against. Add roughly $1.50–$3.00 per sq ft only if an old coating must come off or the slab tests wet.
Is the calculator a quote?
No. It is arithmetic from published South Florida planning ranges. Your real price is confirmed on site after prep needs, crack condition, and a moisture reading are known — the three things no calculator can see.
Why do removal and moisture get their own toggles?
Because they are separate work with separate surprises, and they are the two lines most often buried in a vague 'prep' charge. Toggling them shows exactly what each does to a Miramar total before an installer is standing in your driveway.
My garage is a smaller townhome 1-car. Why does the per-foot price look high?
Setup is fixed: grinding equipment, masking, and cleanup cost nearly the same for 220 sq ft as for 450. Smaller garages therefore price higher per square foot even though the total is lower. The calculator's size steps reflect that reality instead of pretending price is purely linear.